American Electrical Inc. H-040-50008 Terminal Blocks Headers Bulk 8Positions 1Level

RVL2-5 BLUE

Ruichi

Insulated ring terminal RUICHI RVL2-5, 27 A, 16-14 AWG, blue, tinned brass is used when it is necessary to secure a wire in a screw connection. To install such type of terminals under the screw, it is necessary to fully unscrew it, so the installation time is relatively long. The ''O'' type terminal is a brass or copper plate with a hole that is placed on the screw. The bent edges of the plate form a cylinder into which the connected wire is inserted and crimped with special pliers or flat-nose pliers. Insulated ring terminals come in different widths and have corresponding hole diameters from M3 to M10.

QL100A 100A 1000V

Ruichi

RUICHI QL Diode Bridge, 100 A, 1000 V is an electrical device designed for converting, or in other words, rectifying alternating current into pulsating direct current. This rectification is called half-wave rectification and is performed using the Grez bridge circuit.

TB253-1000-16

Ruichi

RUICHI TB253-1000-16 High-Power Fast-acting Thyristor, 1000 A, suitable for cooling devices: O143, O243, O343, OM103, OM104, PT53 package is designed for controlling and switching high currents. The thyristor can be seen as a kind of switch with two stable states: closed and open. The peculiarity of the thyristor''s operation is that if you connect a positive voltage to the anode relative to the cathode, it will not conduct current unlike a diode.

AMMETER 20A (40X40)

Ruichi

An analog panel instrument designed for measuring DC current in a wide range. Installed in panels of various purposes.

SSR-1 440V 60A (Z)D3 (3-32V)

Ruichi

Solid state relays are electronic devices with no moving mechanical parts, designed to switch high-power electrical circuits on and off using low voltage applied to control terminals.

3SSR 440V 10A (Z)A4 (90-280V)

Ruichi

Solid state relays are electronic devices with no moving mechanical parts, designed to switch high-power electrical circuits on and off using a low voltage applied to the control terminals.

AMMETER 30A (48X48)

Ruichi

Ammeter of the pointer type - an analog panel meter designed for measuring direct current in a wide range. Installed in panels of various purposes.

AMMETER 10A (40X40)

Ruichi

Analog panel ammeter - an analog panel instrument designed to measure DC current over a wide range. It is installed in panels for various purposes.

SSR-1 440V 100A(Z)A4 (90-280V)

Ruichi

Solid state relay - electronic devices with no moving mechanical parts, designed to switch high-power electrical circuits on and off using low voltage supplied to the control terminals.

RVL2-4 BLUE

Ruichi

Insulated ring terminal RUICHI RVL2-4, 27 A, 16-14 AWG, blue, tinned brass is used when it is necessary to secure a wire in a screw connection. To install this type of terminal under a screw, the screw must be completely unscrewed, so the installation time is relatively long. The *O* type terminal is a brass or copper plate with a hole that fits onto the screw. The bent edges of the plate form a cylinder into which the connecting wire is inserted and crimped with special pliers or flat-nose pliers. Insulated ring terminals are available in various widths and have corresponding hole diameters for screws from M3 to M10.