3M 8429-9M Cold Shrink Tape Tubing 8420 Ethylene Propylene Rubber (EPR)

EC-1

3M

COLD SHRINK END CAP BLACK

8427-16

3M

SHRINK TUBING 0.67-1.38"X16" BLK

8430-9

3M

Non-Heat Shrink Tubing and Sleeves 9" 1.68-3.69 Diam connector insulator

8428-12P

3M

Non-Heat Shrink Tubing and Sleeves COLD SHRINK TUBE

8427-12P

3M

Non-Heat Shrink Tubing and Sleeves COLD SHRINK TUBE

8426-9M

3M

Tool Kits & Cases COLD SHRINK INSULATOR (#2-4/0)

8425-8

3M

COLD SHRINK TUBING 0.40-0.82X8"

8428-6M

3M

COLD SHRINK INSULATOR 8428 -6M, 10 PER CASE

8429-12

3M

COLD SHRINK TUBING 1.27-2.67X12"

CPT-1/2

3M

COLD SHRINK TUBING 0.5-1.6X4.5"

8428-12

3M

COLD SHRINK TUBING 0.95-1.94X12"

8425-8P

3M

COLD SHRINK INSULATOR 8425 -8P 2-1/0 AWG 10 PER CASE - POINT OF PURCHASE

7010397011

3M

"""3M™ Cold Shrink Insulator 8424-8P, 1-1/0 AWG, 10/case - Point ofpurchase"""

8096-6

3M

3M SCOTCHCAST MINING SPLICE 8096

80008006415

3M

3M™ Motor Lead Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtails (stub) connections at 1000 Volts and less. The splices main component, the lug cover, is made from EPDM rubber as a slip-on. A mastic is used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, the insulated and sealed with the 3M™ Motor Lead Splicing Kit. Each kit makes three splices and contain all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. Scotchlok 30,000 Series copper compression lugs, or other UL listed copper lugs, can be used.

80611443518

3M

3M™ Cold Shrink Quick Insulator QI 18/57-325 provides a quick solution for a wide range of cable sizes. It combines the environmental seal of mastic with the reliability of 3M™s field-proven cold shrink technology. Each cold shrink tube has factory-installed mastic rings in each to provide added protection and range taking capability. Fits cable size range of 250 kcmil - 1250 kcmil. QI series insulators are easily installed by hand with no tools. They seal tightly with excellent wet electrical properties and are tested to requirements of ANSI C119.1. They are recommended for such applications as secondary inline splices, especially in tight spaces or on cable racks, with imperfect or scarred cable jackets, and for splices in which the cable can only be removed from one side. Also recommended for dig-in and sheath repair splices, street lighting, sealing connections or switchgear, transition connectors and set-screw or oversized connectors, and for retrofitting and repairing cable leads for secondary transformers.

80611455181

3M

3M™ Cold Shrink End Caps are close-ended, tubular rubber sleeves that are factory expanded and loaded onto a removable core. When positioned over the end of a cable, or other cylindrical object the core is removed to provide a reliable environmental seal. Four different end caps are available to accommodate a wide range of sizes.

80611425408

3M

These kits are designed to be used with copper compression lugs. After being crimped onto the cables, the lugs are bolted together, then insulated and sealed with the 3M™ Motor Lead Splicing Kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlock Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used.

80611231384

3M

3M™ Cold Shrink Tubes are designed using a unique Cold Shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.