Burr Brown BUF634T Amplifier ICs 15V 5Pins

RVL2-5 BLUE

Ruichi

Insulated ring terminal RUICHI RVL2-5, 27 A, 16-14 AWG, blue, tinned brass is used when it is necessary to secure a wire in a screw connection. To install such type of terminals under the screw, it is necessary to fully unscrew it, so the installation time is relatively long. The ''O'' type terminal is a brass or copper plate with a hole that is placed on the screw. The bent edges of the plate form a cylinder into which the connected wire is inserted and crimped with special pliers or flat-nose pliers. Insulated ring terminals come in different widths and have corresponding hole diameters from M3 to M10.

QL100A 100A 1000V

Ruichi

RUICHI QL Diode Bridge, 100 A, 1000 V is an electrical device designed for converting, or in other words, rectifying alternating current into pulsating direct current. This rectification is called half-wave rectification and is performed using the Grez bridge circuit.

SSR-1 440V 60A (Z)D3 (3-32V)

Ruichi

Solid state relays are electronic devices with no moving mechanical parts, designed to switch high-power electrical circuits on and off using low voltage applied to control terminals.

AMMETER 20A (40X40)

Ruichi

An analog panel instrument designed for measuring DC current in a wide range. Installed in panels of various purposes.

3SSR 440V 10A (Z)A4 (90-280V)

Ruichi

Solid state relays are electronic devices with no moving mechanical parts, designed to switch high-power electrical circuits on and off using a low voltage applied to the control terminals.

AMMETER 30A (48X48)

Ruichi

Ammeter of the pointer type - an analog panel meter designed for measuring direct current in a wide range. Installed in panels of various purposes.

SSR-1 440V 100A(Z)A4 (90-280V)

Ruichi

Solid state relay - electronic devices with no moving mechanical parts, designed to switch high-power electrical circuits on and off using low voltage supplied to the control terminals.

AMMETER 10A (40X40)

Ruichi

Analog panel ammeter - an analog panel instrument designed to measure DC current over a wide range. It is installed in panels for various purposes.

SCL-24

Ruichi

Microchip panels are used to simplify the installation and maintenance of microchips. They are small connectors with standard or pin (socket) contacts, of the ''female'' type. Different types of panels are produced for each type of microchip, designed for a specific type of microchip package.

RVL2-4 BLUE

Ruichi

Insulated ring terminal RUICHI RVL2-4, 27 A, 16-14 AWG, blue, tinned brass is used when it is necessary to secure a wire in a screw connection. To install this type of terminal under a screw, the screw must be completely unscrewed, so the installation time is relatively long. The *O* type terminal is a brass or copper plate with a hole that fits onto the screw. The bent edges of the plate form a cylinder into which the connecting wire is inserted and crimped with special pliers or flat-nose pliers. Insulated ring terminals are available in various widths and have corresponding hole diameters for screws from M3 to M10.