CAL TEST CT4006-2 Banana Jacks & Plugs - 10A CT4006 Bag

VP1-1 0.5A 250V

Ruichi

RUICHI cylindrical fuse VP1-1, 0.5 A, 250 V, -60...+100 °C, with a fusible element is used in compact power distribution devices to limit the effects of overload or short circuit.

DP-50C

Ruichi

The housing for D-SUB connectors is necessary for connecting to laptops, network equipment, digital projectors, HDMI televisions, and uninterruptible power supplies. Depending on the purpose, they can be made of plastic or metal.

MDQ50A-1800V

Ruichi

MDQ50A-1800V single-phase diode bridge. Maximum reverse voltage (Vrrm) 1800V, maximum forward current (If(av)) 50A, surge current (Ifsm) 750A. Size 80 x 40 x 26 mm. Mounting hole size M5.

PCHSN-18

Ruichi

RUICHI PCHSN-18 Brass Hexagonal Mounting Standoff for PCB is used in the assembly of electrical equipment and other areas related to electrical devices. The common feature of all standoffs is the presence of a thread, which allows not only to attach the board, but also to connect the standoffs together.

DL-1DZ2KR 1A. 250V

Ruichi

Network filter is used in small electronic devices and measuring equipment. The filter for noise suppression is a separate complete unit, with a built-in standard three-pin socket, for connection to the device, a key switch, and isolated outputs, for connection to the power supply. There are mounting holes on the filter housing.

DL-8T1 8A. 250V

Ruichi

The network filter is used in compact electronic devices and measuring equipment. The filter for suppressing interference is a separate complete unit, with terminals for connection to the power supply. There are mounting holes on the filter housing.

ZCAT2035-0930A (GREY)

Ruichi

RUICHI ZCAT2035-0930A ferrite wire filter, grey, in case is designed to filter high-frequency interference and noise in conductors by increasing their inductance. They are installed on the cable on the side of the protected device 2-3 cm from the connector, on data transmission cables they can be installed from both ends of the cable.

AMMETER 500A (40X40)

Ruichi

Ammeter of the arrow type - an analog panel instrument designed for measuring direct current in a wide range. Installed in panels of various purposes.

SR25-1-1-12 ON WIRE

Ruichi

Rotary switch RUICHI SR25-1-1-12, 12 positions, 1 direction, 360° rotation angle, 0.3 A, 125 V, 500 mOhm, on wire, installed so that the increase of the adjustable values occurs when moving clockwise, and the decrease - when moving counterclockwise. This method of mounting the circuit reduces the possibility of errors. Rotary switches are the most common rotary switches. The number of handle positions corresponds to the number of contacts in the contact moving sector (contacts) located on the rotor.

BNCP-SMAJ

Ruichi

-