Siemens 7MH4900-3AK61

1575R-A GPS 25DB MMCX-RP

Ruichi

RUICHI 1575R-A GPS 25db MMCX-RP embedded patch antenna, 5.4x15x15 mm, 1575.42 MHz, 25dBi, RHCP-circular, 50 Ohm, -40...+85 °C, internal mounting is a popular type of narrowband microwave antenna consisting of a flat metal petal fixed at some distance parallel to the ground plane. Typically, this design is enclosed in a plastic radiotransparent cover, both for protection against mechanical damage and for aesthetic reasons. Such antennas are simple to manufacture and can easily be modified to meet specific technical requirements. Patch antennas can be used as standalone devices or as radiators for building more efficient systems based on parabolic reflectors. Patch antennas are very similar to microstrip antennas, which are nothing more than patch antennas placed on a dielectric substrate.

DP-50C

Ruichi

The housing for D-SUB connectors is necessary for connecting to laptops, network equipment, digital projectors, HDMI televisions, and uninterruptible power supplies. Depending on the purpose, they can be made of plastic or metal.

DL-1DZ2KR 1A. 250V

Ruichi

Network filter is used in small electronic devices and measuring equipment. The filter for noise suppression is a separate complete unit, with a built-in standard three-pin socket, for connection to the device, a key switch, and isolated outputs, for connection to the power supply. There are mounting holes on the filter housing.

DL-8T1 8A. 250V

Ruichi

The network filter is used in compact electronic devices and measuring equipment. The filter for suppressing interference is a separate complete unit, with terminals for connection to the power supply. There are mounting holes on the filter housing.

BNC-SJ

Ruichi

High frequency connector - a design intended for connecting various electronic devices to electrical circuits for the reliable transmission of high frequency signals. Losses are minimized at the connection points. High frequency connectors can have standard or insulated housings. They can be bayonet or threaded connections.

ZCAT2035-0930A (GREY)

Ruichi

RUICHI ZCAT2035-0930A ferrite wire filter, grey, in case is designed to filter high-frequency interference and noise in conductors by increasing their inductance. They are installed on the cable on the side of the protected device 2-3 cm from the connector, on data transmission cables they can be installed from both ends of the cable.

DL-6DZ2KR

Ruichi

The network filter is used in small electronic devices and measurement technology. The interference suppression filter is a separate complete unit, with a built-in standard three-pin socket for connection to the device, a key switch, and terminals for connection to power. The filter housing has mounting holes for attachment.

DL-25EB3

Ruichi

The network filter is used in small electronic devices and measurement technology. The filter for suppressing interference is a separate complete unit with terminals for connection to power. There are mounting holes on the filter housing.

DL-2DX31

Ruichi

The network filter is used in small electronic devices and measuring equipment. The filter for interference suppression is a separate complete unit with flexible insulated outputs of different colors for connection to power. There are mounting holes on the filter housing.

DL-3DZ 2

Ruichi

The network filter is used in compact electronic devices and measuring equipment. The filter for noise suppression is a separate complete unit, with a built-in standard three-pin socket for connection to the device, and isolated terminals for connection to the power supply. There are mounting holes on the filter housing.