Texas Instruments SN74ACT573DWR Logic Latches 8Bits 5V 1Function

IXFH60N60X3

Littelfuse

Discrete Mosfet 60A 600V X3 To247/Tube Rohs Compliant: Yes /Littelfuse IXFH60N60X3

IXFP34N65X3

Littelfuse

Power MOSFET,N Channel, 650 V, 34 A, 0.1 ohm, TO-220, Through Hole

IXFA34N65X3

Littelfuse

Power MOSFET,N Channel, 650 V, 34 A, 0.1 ohm, TO-263 (D2PAK), Surface Mount

ASP-68979-45

Samtec

Ethernet Cables / Networking Cables

M100U3DM

Mersen

Mersen disconnect switches are extremely durable and versatile. These heavy-duty switches are designed with the most up-to-date disconnect switch technology available. Designed to suit the UL98 standard, the switch gives you a product that makes and breaks power circuits on load. The switches are tested and approved for use in demanding applications, such as Service Entrance.

M800L40

Mersen

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

IXFH54N65X3

Littelfuse

Power MOSFET,N Channel, 650 V, 54 A, 0.059 ohm, TO-247, Through Hole

M60J22

Mersen

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

593-12000

HellermannTyton

780593-12000