Recommend Article
Blog 
Blog Solution Blog Blog Blog Blog Solution Solution Solution
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.
Hot Tag ic
The Travelling Wave Tube (TWT) – A Vacuum Tube Still Key to Microwave Amplification
TWT (Travelling Wave Tube) comes from the close interaction between an electron wave and the RF signal to be amplified
1056
0
30/09/2022
Thermal paste: is it really necessary?
Thermal paste, also known as thermo-conductive paste, is essential to improve heat exchange between electronic components and heatsinks
1564
1
30/09/2022
Threshold Voltage Stability and Gate Oxide Screening Challenges
A team at the Ohio State University has been studying various aspects of the SiC power MOSFET reliability, including threshold voltage instability and gate oxide reliability.
1908
0
30/09/2022
Prospects and Challenges of SiC in the Energy Market
High efficiency and chemically inert nature cemented value of Silicon Carbide in power electronics sphere, leading to boom in its utilization.
1123
0
17/09/2022
GaN HEMTs: Some Device Characteristics and Application Tradeoffs
Reviewing some of the key device characteristics and applications of the more widely available GaN HEMTs along with the tradeoffs
1768
1
17/09/2022
Enabling High Power Density and Efficient Systems with GaN
While there is some overlap in the power levels that GaN and SiC serve, GaN has fundamental characteristics that make it a better fit for applications in which high power density is critical.
1184
0
17/09/2022
The Little Secret of Electric Vehicles
It is easier to reduce carbon dioxide with solar farms and wind farms than with Electric Vehicles, solution is to kill replacement battery
1016
0
17/09/2022
GaN Epi Wafer Manufacturing for High-Voltage GaN Devices
Gallium nitride has become the de facto material in third-generation semiconductors. However, making GaN wafers in the quality you need and the thermal resistance you desire are challenges that fabs are still trying to overcome.
1440
0
15/07/2022
Packaging and Thermal Solutions to Fulfill Trends in Data Centers and Server SMPS
How to meet the design requirements of power supplies using silicon and wide-bandgap switches
863
0
15/07/2022
What Are the Best Applications for IoT in the New World of IC Power Management?
This article explores internet-of-things battery technology. It describes some of the problems that designers face with power sourcing and provides some solutions.
1113
0
15/07/2022
The Life Cycle of the EV Battery
For months now, I have been drowning in my search to find an electric vehicle (EV). Weighing options. Living with car shortages. The batteries on these are huge.
1641
1
15/07/2022
Thermal Management of RF Power Devices
Thermal management of RF power circuits essentially consists of removing excess heat from the components and sensitive areas of the circuit, so as to guarantee the best performance in all operating conditions and avoiding circuit degradation or failure.
1060
0
15/07/2022