Recommend Article
Blog 
Blog Solution Blog Blog Blog Blog Solution Solution Solution
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.
Hot Tag battery
AG13 Battery Equivalent: Comprehensive Guide
Take note of AG13 battery equivalents because when it comes to powering small electronic devices, understanding battery equivalents is crucial.
7497
0
29/07/2024
DL2032 vs CR2032: A Comparison of DL2032 and CR2032
When considering the DL2032 and CR2032 button batteries, people often find themselves confused about the differences between them.
1427
0
26/07/2024
What Battery is Equivalent to CR1620（CR1632 VS CR1616 ）
The CR1620 coin cell battery, chemically known as a lithium manganese dioxide button cell battery, commonly referred to as a button cell, button battery, or coin cell, belongs to the CR series.
143294
1
18/06/2024
CR2025 vs CR2032: comparision & features, which is better?
CR2025 and CR2032 are two common button battery models that are very similar in size, action, and use, and many people are somewhat confused when buying, not knowing the difference between the two.
11394
0
09/04/2024
What Battery is Equivalent to CR2450 (CR2450 vs. CR2032)
The CR2450 battery has a higher nominal voltage and energy density compared to other button lithium batteries
119889
3
25/03/2024
The Difference Between Capacitor and Battery
The choice between a battery and a capacitor will depend on the specific application and the requirements for energy density, power density, cycle life, size, weight, and voltage. Batteries are generally better suited for applications that require more energy and longer cycle life, while capacitors are better suited for high-power applications that require quick energy delivery and have a shorter cycle life.
60623
2
03/04/2023
The Difference Between a Lead-Acid Battery and Lithium-Ion Battery
Whether you are looking for batteries for your home backup, solar installation, car batteries or any other use, there are several types of batteries that come to mind. The most commonly used batteries are lithium-ion batteries and lead-acid batteries, as they are some of the best choices available. Both lead acid batteries and lithium-ion batteries are secondary batteries meaning that they can be used and recharged, as rechargeable batteries.
4958
0
06/03/2023
The Difference between Bad Alternator and Bad Battery
The presence of a battery warning light on the dashboard is never a good sign, but what does this light indicate, and how can you detect some of the most frequent issues that might arise in your vehicle's electrical system??
14190
2
26/11/2022
The Little Secret of Electric Vehicles
It is easier to reduce carbon dioxide with solar farms and wind farms than with Electric Vehicles, solution is to kill replacement battery
987
0
17/09/2022
Protection Solutions for Renewable Energy Storage Systems
Mersen introduces the GBAT and ABAT fuse series to protect electrical energy storage systems in renewable energy applications
1929
0
01/07/2022
Accelerating Electrification of Heavy Transport via Battery Test Solution
Keysight Technologies announced that Scania has selected its Scienlab Battery Test Solutions for research and development facilities
728
0
01/07/2022
Molten Salt for Energy Storage Gets Another Chance, Maybe
A team at the Pacific Northwest National Laboratory (PNNL) has developed an improved molten–salt scheme for energy storage.
960
0
11/05/2022