Recommend Article

Blog

Introduction to Nexperia Automotive-Grade ICs

Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.

Blog

ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained

This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.

Solution

The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles

The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.

Blog

How to Safely Discharge an AC Capacitor

AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.

Blog

Signs of a Bad Camshaft Position Sensor and How to Test it?

A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.

Blog

Symptoms of a Bad Speed Sensor and How to Test It?

Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.

Blog

Current Divider: definition, applications & formula

A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.

Solution

74LS04 Hex Inverter Datasheet(PDF) and Pinout

This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.

Solution

C1815 Transistor: Pinout, Features & Specifications

This article gives a comprehensive introduction to the key information of the C1815 transistor

Solution

Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout

The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.

InfoBlogNewsSolutionSubject
Blog

What is coolant temperature sensor(ECT)

The Coolant Temperature Sensor is an important component in the engine cooling system.

23866 0 20/03/2024
Blog

Schmitt Trigger: what it is & how does it work

Schmitt Trigger is an electronic circuit commonly used in digital logic circuits and signal processing circuits.

7714 0 19/03/2024
Blog

Multiplexing in modern communication: what it is & advantages

In the era of information technology, the demand for data transmission has significantly increased, and traditional electronic communication techniques are no longer sufficient to meet these demands.

19178 1 12/03/2024
Blog

Voltage Follower: what it is & how does it works?

A voltage follower is a circuit that produces an output voltage that closely follows the changes in the input voltage.

40507 0 11/03/2024
Blog

What is an H-bridge:circuit, construction & working

The H-bridge is a relatively simple circuit that typically consists of four independently controlled switch components (such as MOSFETs), arranged in an H-shape.

18023 0 02/03/2024
Blog

DC Voltage: What is It & DC VS AC Symbols

Dc voltage refers to the voltage in which the direction of current remains constant in time.

243191 3 29/02/2024
Blog

PCM audio vs Dolby Digital

PCM (Pulse Code Modulation) audio is a digital representation of an analog audio signal where the amplitude of the signal is sampled at regular intervals and quantized to a finite set of values.

55116 4 27/02/2024
Blog

Stator: Definition, Applications & Stator vs. Rotor

The stator, as an essential component of an electric motor, greatly influences its performance.

90958 3 21/02/2024
Blog

What is Ground in Electronics(GND)

In electronic systems, GND is used to receive and transmit electronic signals so that electronic devices can function properly.

79548 4 20/02/2024
Blog

Multilevel Converter Topologies for Electric Vehicle Fast Charging

The article reviews the utilization of multilevel converters in electric vehicle charging stations to enhance power efficiency. It discusses various types of multilevel converters, highlighting their advantages in high-power applications.

1842 1 19/02/2024
Blog

What Is An EVAP System Leak? Causes, Diagnosis, and Solution

Looking to learn what is an EVAP system leak? In this guide, you will learn everything about EVAP system leaks, their causes, how to diagnose them, and solutions.

74802 4 05/02/2024
Blog

Ferrite Bead: what it is, purpose & working

A Ferrite Bead, also known as a Ferrite Choke or Ferrite Core, is a passive electronic component that is commonly used for noise suppression and filtering purposes in electronic circuits.

16708 0 04/02/2024