Recommend Article
Blog 
Blog Solution Blog Blog Blog Blog Solution Solution Solution
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.
Hot Tag automotive
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
280
0
31/10/2025
Automotive-Grade ICs: The Ultimate Guide to Reliability and Performance (2025)
Discover the world of automotive-grade ICs. Our in-depth review covers AEC-Q100 standards, top manufacturers, and key applications to help you choose the best components for your designs. Learn what makes these chips essential for modern vehicles.
320
0
21/10/2025
Why is my check engine light flashing then stops & how to fix it?
A flashing and then stopping engine light typically indicates a significant problem or malfunction in your vehicle's engine or related systems.
117323
8
21/11/2024
The Electrification Revolution in Automotive
Electric car production has barely surpassed 1% for several years. Then, as a result of government incentives, many OEMs began to transition production to hybrid and electric vehicles.
1168
1
17/09/2022
CAN FD: Anything But Automotive Only
Due to higher bandwidth requirements in the automotive field, the CAN (controller area networking) specification was extended for flexible data–rates with a new iteration known as CAN FD.
1907
0
28/04/2022
The network-on-chip interconnect is the SoC
“The network is the computer,” coined by John Gage of Sun Microsystems back in 1984, proved incredibly insightful. This idea is re-emerging, this time within the SoC realm.
2079
0
05/06/2021
Why network-on-chip has displaced crossbar switches at scale
When the number of elements that need to communicate in a chip is small, a simple crossbar approach to the interconnect function is a possible choice.
2161
1
26/05/2021