Recommend Article
Blog 
Blog Solution Blog Blog Blog Blog Solution Solution Solution
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.
Hot Tag automotive
New Space-saving Side-wettable Flanks
Nexperia, the expert in essential semiconductors, has recently announced its latest product additions to a growing range of discrete devices which it provides in leadless DFN packages with side-wettable flanks (SWF).
727
0
11/05/2022
Wide-Bandgap Semiconductors Drive Vehicle Electrification
In a panel session on wide-bandgap semiconductors for EVs at the recent Advanced Automotive Tech Forum, three industry experts discussed efforts to address GaN and SiC current challenges and future opportunities.
829
0
28/04/2022
CAN FD: Anything But Automotive Only
Due to higher bandwidth requirements in the automotive field, the CAN (controller area networking) specification was extended for flexible data–rates with a new iteration known as CAN FD.
1899
0
28/04/2022
Flexible PCBs Enhance EV Design
Trackwise initially developed the capability to manufacture length-unlimited, flexible circuits because of a requirement from Rolls Royce.
1042
1
09/06/2021
The network-on-chip interconnect is the SoC
“The network is the computer,” coined by John Gage of Sun Microsystems back in 1984, proved incredibly insightful. This idea is re-emerging, this time within the SoC realm.
2073
0
05/06/2021
Why network-on-chip has displaced crossbar switches at scale
When the number of elements that need to communicate in a chip is small, a simple crossbar approach to the interconnect function is a possible choice.
2149
1
26/05/2021