Recommend Article
Blog 
Blog Solution Blog Blog Blog Blog Solution Solution Solution
Introduction to Nexperia Automotive-Grade ICs
Electronics in the automotive industry require accuracy, durability and complete reliability. All systems, including the engine control and modern driver assist, are based on parts that have to endure both high temperature and electrical interference, as well as extended durability of operation.
ASIC vs FPGA Comparison: Performance, Cost, and Design Differences Explained
This article compares Application-Specific Integrated Circuits (ASICs) and Field-Programmable Gate Arrays (FPGAs), two technologies used for creating custom digital circuits.
The Rise of Automotive-Grade SiC/GaN Power Devices in Electric Vehicles
The automotive fast recovery Silicon Carbide (SiC) and Gallium Nitride (GaN) power devices emerge as game-changing technologies.
How to Safely Discharge an AC Capacitor
AC capacitor discharge refers to the process in which a capacitor releases its stored electrical energy in an alternating current (AC) circuit.
Signs of a Bad Camshaft Position Sensor and How to Test it?
A car has a variety of electrical components, one of which is called a camshaft position sensor (CMP). This section will discuss this component, the signs that indicate a problematic camshaft position sensor, and the procedures for doing so.
Symptoms of a Bad Speed Sensor and How to Test It?
Speed sensors are utilized to measure the speed at which devices are spinning. Many vehicles, including automobiles, aerospace vehicles, off-highway and construction equipment, railway vehicles, and military vehicles, require speed sensors.
Current Divider: definition, applications & formula
A current divider is an electrical circuit configuration used to split or divide an input current into multiple branches or paths.
74LS04 Hex Inverter Datasheet(PDF) and Pinout
This article will explain some detailed information about 74LS04 Hex Inverter, including its datasheet, pinout, features and specifications.
C1815 Transistor: Pinout, Features & Specifications
This article gives a comprehensive introduction to the key information of the C1815 transistor
Guide to IC 7408 Logic Gate Chip: Specifications, Applications, and Pinout
The 7408 IC, a crucial component in electronics, features?four logic gates, each with two inputs.
Hot Tag ev
New Higher-power SMD by Transphorm
Transphorm has announced the expansion of its SMD offerings with the addition of the TP65H050G4BS.
974
0
15/07/2022
New Three-Phase BLDC Motor Control Software
Power Integrations has recently released a new motor control software for three-phase BLDC motor drives. This comprehensive hardware-software solution provides 98.2% efficiency, decreases board space by more than 70%, and needs just three components for current feedback circuitry.
1121
0
01/07/2022
PowerDI8080-Packaged MOSFET for EVs
Diodes Incorporated has introduced the PowerDI?8080-5, a high current, thermally efficient power package MOSFET for EV applications.
856
0
25/05/2022
New Solid-state Relays Drive Isolation Technology Forward
Texas Instruments announced a new solid-state relays portfolio, featuring automotive-qualified isolated drivers and switches.
891
0
25/05/2022
High-efficiency Inverter Improves Electric Motor Efficiency
Internal testing of Hillcrest high-efficiency inverter with 80kW electric motor achieves impressive motor efficiency gains.
1061
0
11/05/2022
Schottky Rectifiers Set New Benchmarks in Current Density
Diodes Incorporated has announced the introduction of a series of high-current Schottky rectifiers in ultra-compact chip scale packages (CSPs).
1080
0
11/05/2022
Ultra-Low On-Resistance Rad Hard 200 V Transistor
EPC announces the introduction of the EPC7007 radiation-hardened GaN FET. The EPC7007 has a total dose rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm2). These devices are offered in a chip-scale package, the same as the commercial eGaN FET and IC family. Packaged versions will be available from EPC Space.
791
0
11/05/2022